Solar Power Automatic Water Timer Smart Garden Water Saving Irrigation Controller
Drip Irrigation System Solar Automatic Water Timer Controller
A good irrigation helper for watering plants at the balcony, home and garden. Never worry about the plant when you are away on official business. An LCD display can contorl the watering situation and the standard time. Waterproof surfuce and reliable performance. Can set lots of procedures. Has a memory function, the controller will work normally after change the battery.
Irrigation Frequency: 1-16 times a day/ 30days a month
Irrigation Time: 1min (min), 9hour59min (max)
Water Pressure: 0-400kpa
Water Temperature: 0-40 ℃
Battery: 1.5V rechargeble battery(not include), solar power
Battery Service Life: About 2 years
Function: LCD display, time, irrigation situation, memory
1. Put the solar panel under the sun to test whether it is working.
2. Need to change tha battery when it is near the service life, in order to avoid the water splashing in all directions.
3. Different plants should use different procedurs to irrigate.
4. Because water has impurity, you should wash the stainless strainer in time in case of blocking.
5. If the display shows the situation which battery is low power, you should turn off the faucet , change the new battery and set the watering procedure again. If you don't change the battery, you should turn off the valve all the time.
Step 1: Put the solar panel toward the sun for some time then watch the screen whether appear numbers, if it is that the timer can work. Open the cover, put two 1.5V exchanged batteries in it.
Step 2: Set Time
Press "TIME", the hour starts flashing, press "▲▼" to change the hour number, then press "SET" to confirm, later the minute starts flashing, press "▲▼" to change the minute number and press "SET" to confirm.
Step 3: Set program
Press "PROG", the screen shows prog, start time, running time and days. The number starts to flash. This number means the 1st pro or 2nd pro or 3rd pro etc. You can set 16 different kinds of programs. Press "▲▼" chooses the number and then press "SET" to confirm. Then set the start time, running time and days as the same method. The day 1 means everyday to water, 2 means watering once in two days, etc.
The start time means when you wants to watering.
The running time means how long will water. (Time Range: 1-9hour59min,such as, you need to watering for 5min, set at 0:05. When finish the running time, press"SET" to confirm, automaticlly jump to the days setting)
The day's means how often repeat the program.
Step 4: Check
Please check your set. Press "PROG", then press "▲▼" to check your set one by one. If you meet a program needing to modify, press "SET" and "▲▼" to modify like the third step.
Step 5: Temporary irrigation
Press "ON", the running time (0:02) starts to flash. Then press "▲▼" (change the number) and "SET" (confirm the number) to set hours and minutes you need. After you change the minute's you need, press "SET" to start to watering until the end. If you wants to stop watering, please press "OFF".
1X Solar Power Controller
2X 1.5V Battery